•
RAMP Page:
Parameter
Name
Description / Options
Low
Starting Value of Ramp.
Enter value according to TC Display Mode. If display mode is actual enter
value in temperature/mV and if display mode is % enter value in %.
High
Ending Value of Ramp.
Enter value according to TC Display Mode. If display mode is actual enter
value in temperature/mV and if display mode is % enter value in %.
Hold@0%(s)
Time to wait at Low (0%) level in second.
This parameter is use for
Repeat Format UP/DOWN
or
DOWN/UP
.
Range: 0 to 9999
Rise Time (s)
Time to Increase from Low to High Level.
Range: 1 to 9999
Hold@100%(s)
Time to wait at High (100%) level in second.
This parameter is use for
Repeat Format UP/DOWN
or
DOWN/UP
.
Range: 0 to 9999
Fall Time (s)
Time to decrease from High to Low Level.
Range: 1 to 9999
Repeat Format
How the Ramp should be done.
Available Options:
UP
DOWN
UP/DOWN
DOWN/UP
Repeat
Repeat Counts
Defines how many times the steps are repeated
Range: 1 to 9999
Note:-
For Starting the RAMP refer Page no 41 of ET Setup Section
4.3.3 RTD Setup
