Step Definition
Step Definition for the Step function.
Available Options:
Temperature (Appear only if TC Display mode is Actual)
Percentage (Appear only if TC Display mode is Percentage)
User Defined
Step
Step Value in Temperature/mV/% according to TC Display Mode and TC unit.
Only appear if Step Definition is Temperature or Percentage.
Define Steps
User Defined Step value for Manual and Auto Step Mode.
This option appear only if Step Definition is User Defined.
Maximum 10 step value can be configured. First enter the no of step and then define
step value in serial order.
Repeat Format
How the stepping should be done.
Available Options:
UP
DOWN
UP/DOWN
DOWN/UP
This parameter is enabled only for Auto Step Mode (Manual CheckBox is
Un-Checked)
Repeat
Repeat Counts
Defines how many times the steps are repeated
Range:
1 to 9999
This parameter is enabled only for Auto Step Mode (Manual CheckBox is
Un-Checked)
Note:-
For Manual Stepping and Auto Stepping refer ET Setup Section 4.3.1.
