Source Mode
TC Source Output Format
This option appear only if TC Mode is
SOURCE
.
Available Options:
STEP
RAMP
At a time one can be selectable.
Press F1 key on the one of the option for more settings.
Reset
Additional Info.
Reset the Additional Information of Measure mode like Minimum &
Maximum
This option appear only if TC Mode is
MEASURE
.
•
STEP Page:
Parameter
Name
Description / Options
Low
Starting Value of Step.
Enter value according to TC Display Mode. If display mode is actual enter value in
temperature/mV and if display mode is % enter value in %.
High
Ending Value of Step.
Enter value according to TC Display Mode. If display mode is actual enter value in
temperature/mV and if display mode is % enter value in %.
Manual
(Output Type)
Step Manual Mode Selection CheckBox.
Ticking this checkbox will enable Step Manual Mode. And Un-ticking will enable Auto
Step Mode.
Step Time (s)
Enter the time for a single step in seconds,
Range:
1 to 9999
This parameter is enabled only for Auto Step Mode (Manual CheckBox is
Un-Checked)
