DOWN
UP/DOWN
DOWN/UP
This parameter is enabled only for Auto Step Mode (Manual CheckBox is
Un-Checked)
Repeat
Repeat Counts
Defines how many times the steps arerepeated
Range:
1 to 9999
This parameter is enabled only for Auto Step Mode (Manual CheckBox is
Un-Checked)
➢
Manual Stepping
To Enable Manual Stepping, select Source Type as STEP &
Check the Manual CheckBox.
If this mode is enabled, icon will appear in Source Display
Window in RUN Page.
Pressing UP or DOWN key in RUN Page will Increment or
Decrement Source Value by Step Size specified in STEP Page.
In RUN Page, Source Value can directly change by Pressing
F1
key (EDIT) and modifying value like in EditBox. & STEP
Setting can be accessed directly by
F2
key (SETTING).
➢
Auto Stepping
To Enable Auto Stepping, select Source Type as STEP & Un-
Check the Manual CheckBox.
If this mode is enabled,
(Step UP) or
(Step Down) icon
will appear in Source Display Window in RUN Page and F1 &
F2 Button change to
START
&
SETTING
respectively.
