3. Start Up & Basic Operations
3.1 Power ON or OFF
To set the instrument power ON, press and release
button until the
display comes on. During the power on sequence, the instrument shows a
Startup Message and then shows the applicable data.
To set the instrument power off, press and hold (≈ 2 seconds)
button again. When the power is off, the last set of configuration options
stays in memory.
3.2 The User Interface
Every time PCE-MCA 50 is switched on, the startup message ends in
RUN Page.
There are 5 Display Mode available in RUN Page.
1. RTD (Measure/Source) + EM Measure Mode / Switch Test
Mode
2. TC (Measure/Source) + EM Measure Mode / Switch Test Mode
3. ET (Source) + EM Measure Mode / Switch Test Mode
4. Pulse EM Measure Mode / Switch Test Mode
5. Frequency EM Measure Mode / Switch Test Mode
This Display Mode can be selected from MENU
→
DISPLAY Page.
Display Screen is divided into two parts. Which Information to be shows
can be selectable in Display Mode Menu Refer Section 3.2.3 on Page-
22 for more info.
