Available Options:
UP
DOWN
UP/DOWN
DOWN/UP
Repeat
Repeat Counts
Defines how many times the steps arerepeated
Range:
1 to 9999
➢
Starting the RAMP
To Enable Ramp, select Source Type as RAMP.
If this mode is enabled,
(Rising Ramp) or
(Falling Ramp)
or
(
Ramp Hold @ 100%
) or
(
Ramp Hold @ 0%
) icon will appear
in Source Display Window according to current RAMP mode in
RUN Page and F1 & F2 Button change to
START
&
SETTING
respectively.
RAMP can be started by Pressing
F1
key (START). After that
F1 & F2 key will change to
PAUSE
&
STOP
respectively. So by
pressing F1 & F2 key running RAMP can be PAUSE or STOP
at any time in RUN Page.
Note:
While RAMP is running RAMP settings can’t be accessible and
Source P
age Parameter settings can’t be change. Stop RAMP before
changing any settings.
