26
Magnum 1500 user manual
O
PTIONAL
DUCTING
ADAPTER
Fog/smoke ducting gives flexibility in directing fog output. It can also allow
you to install the Magnum 1500 in a safe location with convenient access
for refilling, service, etc.
The Magnum 1500 can be connected to standard 4-inch (102 mm)
fog/smoke ducting using an adapter. Your Martin dealer can supply this
adapter as an accessory pack (P/N 92625008) that also contains 5 m
(16.4 ft.) of ducting.
I n s t a l l i n g a d u c t i n g a d a p t e r
Warning!
Airflow is necessary at the entrance to the ducting. Never
block the air gap between the Magnum 1500 and the ducting
adapter.
To install the optional ducting adapter:
1. Working at the nozzle end of the machine, remove the two T20 Torx
screws that hold the rubber feet in place on the bottom of the machine,
and remove the two screws in the same place on the top of the
machine.
2. Place the ducting adapter over the nozzle so that the adapter mounting
holes line up with the holes in the housing, and replace the screws and
rubber feet.