10
Magnum 1500 user manual
I
NSTALLATION
P h y s i c a l i n s t a l l a t i o n
The Magnum 1500 may be either suspended from a suitable support by
means of its adjustable mounting bracket or placed on a flat level surface.
Do not install the machine by any other means, as this can cause
overheating or malfunction.
Warning!
To allow adequate cooling, the Magnum 1500 must be located
at least 0.1 meters (4 in.) from any surface.
The Magnum 1500 must be located well away from flammable
materials.
The Magnum 1500’s surface temperature can reach 50°C (122°
F) and the nozzle can reach 200°C (392° F). The machine must
be positioned well out of reach of the public in a location
where accidental contact is impossible.
Do not install the Magnum 1500 at an angle of more than 30°
up or down from horizontal.
To avoid fluid leakage, the fluid bottle filler cap must always point upwards.
If necessary, the fluid bottle can be repositioned (see “
Repositioning the
fluid bottle
” on page 12).
Suspending from a support
Warning!
Block access below the work area and work from a stable
platform when installing.
Always use a secure means of secondary attachment that can
hold at least 10 times the weight of the machine.
1. If using a rigging clamp (not included), verify that the clamp is
undamaged and can bear at least 10 times the machine’s weight. Bolt
the clamp securely to the machine’s mounting bracket with a grade 8.8
(minimum) M12 bolt and lock nut, or as recommended by the clamp