14
Magnum 1500 user manual
I n s t a l l i n g c o n t r o l h a r d w a r e
The Magnum 1500 can be operated using:
• the remote control unit supplied with the machine, or
• a DMX controller using an interface that is available as an accessory
from your Martin dealer (P/N 90758025). Installing DMX control
hardware is covered in “
DMX installation
” on page 27 of this manual.
Remote control unit installation
To install the remote control unit:
1. Power the machine off.
2. Plug the RJ-45 connector on the remote control cable into the IN socket
on the connections plate (see illustration).
3. When you power the machine on again, check that the HEAT indicator
on the remote control is lit to show that the machine is warming up.
Multiple linking with a remote control unit
The Magnum 1500’s multiple linking feature allows more than one
machine to be controlled using the remote control. If machines are linked,
all machines receive the same instructions from the remote control and
behave identically. Up to four Magnum 1500s can be linked to the remote
control.
For multiple link operation, machines must be linked using shielded data
cable with at least one twisted pair that is designed for RS-485
Remote
Control
Remote
Control
Out
In
Out
In
Remote control IN
Remote control OUT