24
Magnum 1500 user manual
T
ROUBLESHOOTING
Problem
Probable cause(s)
Suggested remedy
LEDs light, but no fog
output when machine is
fired using Fog or Timer
switch
Heater not at operating
temperature
Allow time to warm up,
wait for READY LED on
remote control to light or
LED on machine to light
orange or green
Fluid below minimum
level
Refill
Airlock in pump
Prime pump
No light from LEDs on
remote control or
connections module
No power
Check power supply,
on/off switch and
connections
Control device not
connected
Check connections
Fog disperses too
quickly
Wrong grade of fluid
used for the application
Consult your Martin
dealer
Fuse blows repeatedly
Electrical malfunction
Refer to service
technician
LED on machine lights,
but no fog output when
machine is fired using
DMX
Incorrect DMX address
Check DIP-switch
settings
Machine not ready
Allow time to warm up,
wait for LED on machine
to change from red to
orange or green
No DMX termination
Fit termination plug to
last device on DMX link
Airlock in pump
Prime pump