Magnum 1500 DMX interface module
27
M
AGNUM
1500 DMX
INTERFACE
MODULE
The Magnum 1500 can be controlled using a DMX controller on a serial
data link if a DMX interface module is installed. This module is available
separately as an optional accessory (DMX Interface Module, Magnum
1500, P/N 9
1612000
).
Up to 32 devices can be controlled via DMX on one serial data link. The
link must be daisy-chained in one single line, maximum 500 meters (1640
ft.) long. More devices can be added and the link can be extended beyond
500 meters or branched using an optically isolated splitter/amplifier such
as the Martin RS-485 Opto-Splitter (P/N 90758060).
D M X i n s t a l l a t i o n
To use a DMX controller with the Magnum 1500, you must remove the
remote control module that is fitted as standard and fit a DMX module in
its place.
Installing a DMX module
To install a DMX control module:
1. Disconnect the power supply cable and allow the machine to cool for at
least 20 minutes.
2. Remove the three T25 Torx screws on the remote control connections
module and remove the black rubber protection molding.