Introduction
7
S a f e t y i n f o r m a t i o n
Warning!
This product is not for household use. It presents risks of
lethal or severe injury due to electric shock, burns, falls and
breathing problems.
Read this manual
before powering or
installing the machine, follow the
safety precautions listed below and observe all warnings in this manual
and printed on the machine. If you have questions about how to operate
the machine safely, please contact a Martin distributor for assistance or
call the Martin 24-hour service hotline on +45 70 200 201.
Refer any service operation not described in this manual to a qualified
technician.
Preventing electric shocks
• Always ground (earth) the machine electrically.
• Use only a source of AC power that complies with local building and
electrical codes, and that has both overload and ground-fault (earth-
fault) protection.
• Check the voltage is correct for use with the machine. The voltage
setting is printed on the machine’s serial label.
• Disconnect the machine from AC power before refilling the fluid tank,
resetting the thermal protection cutout, removing covers or servicing.
• Disconnect the machine from AC power when not in use.
• Do not expose this machine to wet outdoor conditions – the machine is
not waterproof.
• Do not spill fluid over the machine. If fluid is spilled, disconnect the
machine from AC power and clean with a damp cloth. If fluid is spilled
onto electronic parts, contact an approved Martin dealer for advice.
• Do not remove the covers or attempt to repair a faulty machine.
• Refer all service to an authorized Martin service dealer.
• Do not operate the machine if the power supply cord is damaged. A
damaged power supply cord must be replaced with a new item,
available from your Martin dealer.
• Do not operate the machine with damaged or missing parts.
• Moisture and electricity do not mix. Do not aim fog output at electrical
connections or devices.