Magnum 1500 DMX interface module
33
D M X c o n t r o l l e r o p e r a t i o n
When the Magnum 1500 is powered on, the LED on the DMX module
next to the DIP-switches lights to indicate that a valid DMX signal is being
received, and the machine starts to warm up. The Magnum 1500 is ready
for operation after approximately 10 minutes.
Set the level on the Magnum 1500’s DMX control channel to zero to cut
fog output to zero. Increase the level on the machine’s DMX control
channel to increase the level of fog output.
DMX control channel levels
Level
Percentage
Effect
0-27
28-255
0-10%
11-100%
No fog output
Fog output increases in 24 increments