MARMON ANGELO PO BX101E, Technical Manual

Page: 98 / 121

Copyright by Servizio Clienti ANGELO PO Spa
98
6.2. Motor
Proceed as follows to replace the motor:
1. front left side view of the motor from the component compartment (PIC 1);
2. to disassemble the motor, loosen the fixing screw (PIC 2), the only fixing between
the motor shaft shaft and the fan (it may be necessary to heat the shaft and the
hub).
3. fixing sequence of the clamping washer, change them if the motor is replaced (PIC
3);
4. assembly sequence of the motor shaft sealing system: brass bushing, sealing ring
(CORTECO), VITON gasket in the component compartment (PIC 4). When
replacing the sealing ring, it must be greased with MOLIKOTE 41.
PIC 1
PIC 2
PIC 3
PIC 4