MARMON ANGELO PO BX101E, Technical Manual

Page: 65 / 121

Copyright by Servizio Clienti ANGELO PO Spa
65
5. Display parameters : after the burner selection it is possible to see
the parameters: first display shows the fan blower maximum
speed, Vmax; the value is divided for 10 i.e. in the picture the
speed is 6.400 rpm. The second display shows the fan blower
minimum speed Vmin and the third display shows the fan blower
ignition speed Vignition, both the values expressed in percentage.
6. Start testing : the START/STOP button is on, press it to start the testing phases.
STEP 1 : burner at minimum power (cold)
- check correct ignition
- check stability of the minimum
-
check combustion (CO, CO2) of the minimum when cold
- ONLY in this phase can you adjust the valve
-
enter values on the installation report
-
go to the next step by pressing the core probe button.
STEP 2 : burner at maximum power.
- in this step it is forbidden to act on the valve adjustment
- check stability of the maximum
- check combustion (CO, CO2) of the maximum
- enter values on the installation report
- go to the next step by pressing the core probe button.
STEP 3 : shutdown, ignition and burner at minimum (hot).
- in this step it is forbidden to act on the valve adjustment
- check correct re-ignition
- check stability of the minimum when hot
- check combustion (CO, CO2) of the minimum when hot
- enter values on the installation report