MARMON ANGELO PO BX101E, Technical Manual

Page: 89 / 121

Copyright by Servizio Clienti ANGELO PO Spa
89
5.1.5. Washing alarms table
Washing cycle control alarms table
Alarm
code
Problem Solution
1 E21
The washing cycle has been
interrupted because the float didn’t
switch during the detergent load
phase.
Check the pipe position and the level of cleaner in the
tank; top up if necessary and restart the washing
cycle. Carry out the PUMP TEST
2 E22
The washing cycle has been
interrupted because the float didn’t
switch during the sanitizer load
phase.
Check the pipe position and the level of cleaner in the
tank; top up if necessary and restart the washing
cycle. Carry out the PUMP TEST
3 E24
The washing cycle has been
interrupted because the float didn’t
switch during the tank unload
phase.
Possible obstruction in the oven drain. Carry out the
PUMP TEST
4 E26
The washing cycle has been
interrupted during the rinsing stage,
cause
d by “missing water”
Carry out the PUMP TEST