MARMON ANGELO PO BX101E, Technical Manual

Page: 83 / 121

Copyright by Servizio Clienti ANGELO PO Spa
83
In the more intensive cleaning programs, the dosing of the cleaning products is repeated
several times depending on the program.
Available cleaning programs:
The detergent and sanitizing distribution is made as follows:
•
Product load. The pump sends the chemicals into the empty tank, this phase takes a
few minutes. The total amount of chemicals is less than the tank capacity.
•
Distribution. After stopping the pump, the water solenoid valve opens for a few
seconds. The water pressure (1.5 bar nominal Max 2 bar) passes through the tank and
mixed with the product, carries it into the chamber through the appropriate sprinklers.
•
Emptying the tank. After finishing the distribution, the tank, still full of water and residual
chemical, is flushed through the solenoid valve until the next stage.