manualshive.com logo in svg

Manitowoc Multiplex 42 MR04, Installation, Operation And Maintenance Manual

Share
Download
Manitowoc Multiplex 42 MR04 Installation, Operation And Maintenance Manual Download Page 3

Table of Contents

Part Number 020002365 08/25/2015 3 

Section 1

General Information

Read This Manual ...............................................................................................................5

Unit Inspection ...................................................................................................................5

Model Numbers ..................................................................................................................5

How to Read a Model Number ..........................................................................................5

Accessories ..........................................................................................................................6

Special Applications ...........................................................................................................6

Attention: Marine Installations ..........................................................................................................6

Outdoor Applications ...........................................................................................................................6

Serial Plate Location ..........................................................................................................7

Warranty Information ........................................................................................................7

Section 2

Installation

General ................................................................................................................................9

Dimensions and Clearances — All Models .......................................................................9

Remote Condenser ............................................................................................................................. 10

Safe Installation Dos and Don’ts .....................................................................................10

Location Requirements ....................................................................................................11

Clearances .............................................................................................................................................. 11

Ratings..................................................................................................................................................... 11

Kitchen Equipment Installer Representative Responsibilities ............................................ 11

Requirements for Post Mix Refrigeration Units ........................................................................ 11

Installer Instructions ........................................................................................................12

Preparation ............................................................................................................................................ 12

Electrical............................................................................................................................12

General .................................................................................................................................................... 12

Minimum Circuit Ampacity .............................................................................................................. 12

Electrical Requirements .................................................................................................................... 12

Specifications ........................................................................................................................................ 12

Grounding Instructions ..................................................................................................................... 13

Plumbing/Water Supply ..................................................................................................14

Plumbing Potable Water ................................................................................................................... 14

Plumbing Requirements – General ............................................................................................... 14

Water Supply ......................................................................................................................................... 14

Plumbing Circuit Diagrams — Models 42, 44 and SC1000 .................................................. 15

Plumbing Circuit Diagrams — Models 50 and SC2000 ......................................................... 18

Refrigeration Unit Installation ........................................................................................20

Unpacking and Inspecting............................................................................................................... 20

Unit Installation Overview ............................................................................................................... 20

Positioning of Refrigeration Unit ................................................................................................... 21

Equipment Placement ....................................................................................................................... 21

Electrical Connections ....................................................................................................................... 21

Tower Installation .............................................................................................................21

Conduit Installation .........................................................................................................22

Proper Use of John Guest Fittings ................................................................................................. 22

Connecting Supply Lines .................................................................................................................. 23

Routing Insulated Conduit ............................................................................................................... 25

Connecting Insulated Conduit at the Unit ................................................................................. 25

Summary of Contents for Multiplex 42 MR04





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands