manualshive.com logo in svg

Manitowoc Multiplex 42 MR04, Installation, Operation And Maintenance Manual

Share
Download
Manitowoc Multiplex 42 MR04 Installation, Operation And Maintenance Manual Download Page 22

22 

Part Number 020002365 08/25/2015

Installation 

Section 2

Conduit Installation

PROPER USE OF JOHN GUEST FITTINGS

This unit has a compression type tube connector. The 

following are step-by-step instructions on how to properly 

use these fittings. For connecting purposes, all connections 

are furnished with a 3/8" barb connector.

1.  Before inserting tubing into a John Guest fitting, be 

sure end of tubing is cleanly and squarely cut.

Correct

Wrong

Tubing

Tubing

Proper Tubing Cut

2.  Lubricate O-ring with water. Insert tubing into John 

Guest fitting. Push tubing firmly through fitting until 

it rests against the tube stop in the fitting’s main body 

housing. The tubing is now locked into the John Guest 

fitting.

3.  To release tubing from John Guest fitting, slide collet 

cover up tube and push in collet. Pull tubing out.

4.  Neatly route syrup lines, braided CO

2

 gas line and the 

black incoming water line through the inlet opening on 

the left side of the refrigeration unit. Do not allow any 

of these lines to rest on the agitator motor or any other 

surface that may become hot.

5.  Attach the black water supply line to the water filter 

or a filtered water supply. A 3/8" barb fitting and 

tab clamp, reducer bushing and 3/8" male pipe x 

1/2" OD John Guest tube adapter are provided in the 

installation kit for making this connection.

6.  Route the numbered syrup lines to the syrup supply 

(syrup tanks, Bag-In-Box, or bulk syrup). Do not attach 

lines to syrup supply at this time. Lines will be attached 

to syrup supply after system is tested for leaks.

7.  Attach the braided CO

2

 line with swivel nut to a 

regulated CO

2

 supply. Use nylon water provided in 

installation kit. NOTE: do not turn ON CO

2

 supply to 

system at this time.

Collet

Collet

Tube 

Stop

Tubing

Tubing

Wrong

Correct

Collet Cover

Collet Cover

Proper John Guest Fitting Installation

Graided CO

2

 

Gas Line

Color Coded 

Syrup Lines

Black Water 

Supply Line

Summary of Contents for Multiplex 42 MR04





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands