10
Part Number 020002365 08/25/2015
Installation
Section 2
REMOTE CONDENSER
OPTIONAL
38.00" (96.52 cm)
34.00" (86.36 cm)
30.00" (76.20 cm)
29.50"
(74.93 cm)
27.94"
(70.97 cm)
1.50"
(3.81 cm)
6.50"
(16.51 cm)
29.16"
(74.06 cm)
OPTIONAL
20.00" (50.80 cm)
16.00" (40.64 cm)
12.00" (30.48 cm)
14.62"
(37.13 cm)
4.00"
(10.16 cm)
3.50"
(8.89 cm)
6.00"
(15.24 cm)
Safe Installation Dos and Don’ts
n
Warning
Read the following warnings before beginning an
installation. Failure to do so may result in possible death
or serious injury.
•
DO
adhere to all National and Local Plumbing and
Electrical Safety Codes.
•
DO
turn OFF incoming electrical service switches when
servicing, installing, or repairing equipment.
•
DO
check that all flare fittings are tight. This check must
be performed with a wrench to ensure a quality seal.
•
DO
inspect pressure on regulators before starting up
equipment.
•
DO
protect eyes when working around refrigerants.
•
DO
use caution when handling metal surface edges of
all equipment.
•
DO
handle CO
2
cylinders and gauges with care. Secure
cylinders properly against abrasion.
•
DO
store CO
2
cylinder(s) in well ventilated areas.
•
DO NOT
exhaust CO
2
gas (example: syrup pump) into
an enclosed area, including all types of walk-in coolers,
cellars, and closets.
•
DO NOT
throw or drop a CO
2
cylinder. Secure the
cylinder(s) in an upright position with a chain.
•
DO NOT
connect the CO
2
cylinder(s) directly to the
product container. Doing so will result in an explosion
causing possible death or injury. It is best to connect the
CO
2
cylinder(s) to a regulator(s).
•
DO NOT
store CO
2
cylinders in temperature above 125°F
(51.7°C) near furnaces, radiator or sources of heat.
•
DO NOT
release CO
2
gas from old cylinder.
•
DO NOT
touch refrigeration lines inside units; some may
exceed temperatures of 200°F (93.3°C).
NOTICE:
All utility connections and fixtures must be sized,
installed, and maintained in accordance with Federal, State,
and Local codes.
