Mallinckrodt NELLCOR NPB-4000, Service Manual

Page: 13 / 219

3-1
SECTION 3: PERFORMANCE VERIFICATION
3.1 Introduction
3.2 Equipment Needed
3.3 Performance Tests
3.4 Safety Tests
3. PERFORMANCE VERIFICATION
3.1 INTRODUCTION
This section discusses the tests used to verify performance following repairs or
during routine maintenance. All tests can be performed without removing the
NPB-4000/C covers.
If the NPB-4000/C fails to perform as specified in any test, repairs must correct
the problem before the monitor is returned to the user.
3.2 EQUIPMENT NEEDED
Table 3-1 lists the equipment required for performance verification.
Table 3-1: Required Test Equipment
Equipment Description
Digital multimeter (DMM) Fluke Model 87 or equivalent
Sensor extension cable EC-8
Durasensor
® oxygen transducer DS-100A
Oxisensor
®
II
oxygen transducer D-25
ECG cable CE-10
ECG electrodes standard
ECG leads LE series
NIBP hose SHBP-10
NIBP cuff SCBP series
Pulse oximeter tester Nellcor SRC-2
ECG simulator medSim 300 or equivalent
NIBP simulator Bio-Tek “BP Pump” or equivalent
Respiration simulator medSim 300 or equivalent
Temperature simulator medSim 300 or equivalent
Safety analyzer Bio-Tek 601 Pro or equivalent
Stopwatch Manual or electronic