Section 5 – Programming (Continued)
35
5-3.5.
3-Speed 10KPendant Programming.
N.
Motor Menu for controlling the “Programmable Motor Control and Select” Push Button.
(For a three motor crane use “3”; for standard five motor use “5”, for Select function use Select).
For
three motor system
this push button is nonfunctional (Motor “3”). This configuration is typically used with the 10K16
output Receiver.
For
five motor systems
this button controls the main and aux motors such as a hoist and trolley. (See Section 4. Operation
for details on the operation of this button). To program a fifth motion select (Motor “5”). This five motor application can
only be used with the 10K24 output Receiver. The Programmable Motor Control and Select push
button becomes a switch
to toggle between “A” and “B” or both, where “A” and “B” are main and auxiliary motors respectively. The main motor
outputs are motor 1 and motor 2 and the auxiliary motor outputs are motor 4 and 5 respectively.
For up to
5 motors
using the
select function
this button is available to use select relays (Motor “Select”).
Aux Trolley OFF
This function appears if a 5 motor system is programmed in. Checking the box disables the Aux Trolley function for a 4
motor system.
Tandem OFF For Hoist, Trolley or Bridge (normally not checked).
This function appears if a five motor system or select function is chosen. Normally the box is not checked, meaning “Both
A and B” operation is enabled (both MAIN and Aux or Select 2 and Select 1 can be ON at the same time). Putting the
check in the box by tapping on it disables the “Both” function (“A” and “B” will not come ON at the same time). This
function maps to Pendant Switch 4 position 3; if SW4 position 3 is switched “ON” check Tandem OFF box on PDA.
This completes the telePendant 3-Speed programming; when completed with the above, tap “Save”.
Save will take you back to the Initial start screen. At this point select another Bank to program or
go to Section 5-4.
Saving, Downloading, Reading the Programs and Other PDA Functions on page 40.
E-STOP
3 Speed 10K Pendant Transmitter.
Programmable
Motor Control and Select Push Button
with Indicators
A B
