Section 5 – Programming (Continued)
39
Reading the telePendant History.
To read Service information from the
tele
Pendant Transmitter:
1.
Line up the PDA’s infrared port and go to bank 5 as in steps 1 to 3 above, with the transmitter ON. Select
“Admin”
2.
Select “History”
4.
Unit will read: Past Service Orders of the
tele
Pendant unit.
Reading the PDA Transmitter Software Version.
To read PDA Software Version from the
tele
Pendant Transmitter:
1.
Select “Admin”
2.
Select “About”
3.
Unit will read: Transmitter Programmer Software Version number.
Beaming (Sending) the Configuration(s) to another PDA.
To send a configuration setting to another PDA.
1.
Line up the PDA’s infrared port with the other PDA, which is turned ON.
2.
Select “Beam Setting.”
3.
Select the item(s) you wish to send.
4.
Wait for confirmation text on PDA screen.
Error Statements and Codes.
Tx Type Mismatch; if while attempting to program a
tele
Pendant you receive an error code such as “Error AAAB” you
have selected a different style transmitter in the PDA than you are attempting to program. Most common cause is trying to
program a 2-speed
tele
Pendant with 3-speed selected or vice versa.
NOTE
TO PROGRAM OR READ DATA FROM THE telePendant, THE TRANSMITTER MUST BE
TURNED ON AND IN BANK FIVE (5).
