Section 6 – RCP Programming (Continued)
45
Common settings.
The
tele
Pendant transmitter has four configurable “Banks” available. Each bank is a complete operational
configuration consisting of frequency, access code and other transmitter parameters. These banks give the
capability to operate up to four different cranes using one transmitter, and they can be used as possible options for
crane select. A fifth bank is used to send and receive programming.
These are settings that apply to all four banks of the transmitter.
Bank Password (Can be disabled).
The Bank Password prevents the active transmitter bank from being changed accidentally. The Bank Password is
the same for all Banks. Bank password protection is described in detail in
Section 4-5
Additional
tele
Pendant
Operational Features.
Please familiarize yourself with this section before programming.
If you choose not to
use the default password you can create a new password by selecting the buttons to be used with the four pull
down menus, “First press”, “Second Press” etc. Be sure to write this password down in a safe place for future
reference. The default password is 6, 5, 4, 3.
NOTE
ALWAYS REMEMBER TO STORE THE PASSWORD IN A SECURE LOCATION FOR ACCESS IF THE
PASSWORD IS LOST OR FORGOTTEN. ONCE THE TRANSMITTER IS PROGRAMMED THERE IS NO
WAY TO DEFEAT THE PASSWORD WITHOUT USING THE RCP SOFTWARE TO EITHER READ THE
PASSWORD OUT OR REPROGRAM A NEW ONE.
WARNING
THIS PASSWORD FUNCTION IS NOT TO BE USED AS A SECURITY DEVICE. THE PURPOSE OF THIS
FUNCTION IS TO PREVENT ACCIDENTAL BANK SWITCHING. THE BEST FORM OF SECURITY IS
ALWAYS TO LOCKUP THE TRANSMITTER WHEN NOT IN SERVICE. FAILURE TO FOLLOW THIS
WARNING COULD RESULT IN SERIOUS INJURY OR DEATH AND DAMAGE TO EQUIPMENT
.