Magnetek Telemotive TelePendant, Programming And Users Manual, Page: 28 / 56

Section 5 – Programming (Continued)
25
After loading the tele Pendant program the first screen is the initial setup screen.
B. Enter “Tx Type” (Must be selected).
First select the transmitter type being used (two-speed “2 SPD tele Pendant” or three-speed “3 SPD tele Pendant”). With
your PDA stylus tap the arrow after transmitter “Tx Type”. A pull down menu will appear. Select “2 SPD tele Pendant” or
“3 SPD tele Pendant” and the menu will close showing your selection.
For 3-Speed legacy 10K receivers select 3-Speed 10K Pendant.
C. Enter Bank Password (Can be disabled).
Bank password protection is available in changing the transmitter once it has turned OFF. The Bank Password is the same
for all Banks. Bank password protection is described in the
tele Pendant operational description in Section 4-5. Additional
tele Pendant Operational Features. Please familiarize yourself with this section before programming. A check appears in
the box and a list of four buttons. These buttons list the first through fourth buttons and are in the order of entry for the
appropriate buttons. Select the four transmitter buttons in the sequence that you wish to be the password by tapping the
arrow by “Button #” and making a selection from the pull down menu for each of the four password entries. Be sure to
write this password down in a safe place for future reference. The default password is 6, 5, 4, 3.
NOTE
ALWAYS REMEMBER TO STORE THE PASSWORD IN A SECURE LOCATION FOR ACCESS IF THE
PASSWORD IS LOST OR FORGOTTEN. ONCE THE TRANSMITTER IS PROGRAMMED THERE IS NO WAY TO
DEFEAT THE PASSWORD WITHOUT USING A PDA TO EITHER READ THE PASSWORD OUT OR
REPROGRAM A NEW ONE.
Tx Type 2 SPD telePendant
Transmitter Programmer
Name: ……………………………..…. M
Use bank password
First press Button 6
Second press Button 5
Third press Button 4
Fourth press Button 3
Bank 1 Bank 2 Bank 3 Bank 4
off off off off
1 SPD telePilot
2 SPD telePilot
2 SPD telePendant
3 SPD 10K Pendant
3 SPD telePendant
Button 1
Button 2
Button 3
Button 4
Button 5
Button 6
Name: ……………………………..…. M
Tx Type 2 SPD telePendant
Use bank password
Transmitter Programmer
First press Button 6
Second press Button 5
Third press Button 4
Fourth press Button 3
Bank 1 Bank 2 Bank 3 Bank 4
off off off off