Section 5 – Programming (Continued)
28
G.
Enter the Access Code (Must be inputted for system to work):
Screen switch operation.
The screen switches are labeled from left to right “A”, and “B”. They are numbered from left to right 1 to 8. The darkened
rectangle to the bottom is “OFF” or “0” and the darkened rectangle to the top is “ON” or a “1”. Tapping the lightened
rectangle will cause the switch to toggle.
See Section 5.1. Access Code Programming for details on access code programming. There should be a label either on the
receiver or the old transmitter showing the access code, and it should be numbered A1 through A8 and B1 though B8. Find
this number and tap the respective switches on the screen. If you cannot find a label with access code information, copy
directly from the access code dip switches in your transmitter or receiver, being careful to match the designation and switch
position as they do vary from model to model.
Cancel
System
10K
Freq
AK01
Setup Bank #
Save
Multibox
Auto Turn Off Active ESTOP
RX Setting
15
Switch conf.: H,T,B
Main/Aux Aux
only
telePendant
Access Code
Programming.
A1
Receiver access code
1
0
B1
1
0
Timer
S3-1
1
0
F. Screen switches for
Access Code