Section 5 – Programming (Continued)
37
5-4. Saving, Downloading, Reading The Programs and Other PDA Functions.
NOTE
TO PROGRAM OR READ DATA FROM THE telePendant, THE TRANSMITTER MUST BE
TURNED ON AND IN BANK FIVE (5).
Saving the Programming File.
With the initial
tele
Pendant screen displayed, tap in the lower left corner of your PDA, the title bar at the top of the screen
will show a menu or tap on the word “
tele
Pendant”. Choose the way you wish to save the file. Tap on your choice and
follow the instructions on the PDA to complete file saving. Old files can be deleted, called up, modified and renamed by
this same menu.
Sending a Program to the telePendant.
WARNING
AFTER EVERY PROGRAMMING OF THE TRANSMITTER, TEST THE UNIT BY TURNING IT ON AND OFF
NEAR THE APPROPRIATE RECEIVER. IF THE RECEIVER DOES NOT RESPOND, DO NOT ACTIVATE A
FUNCTION BUTTON! THE TRANSMITTER MAY HAVE INCORRECT PROGRAMMING, WHICH COULD MOVE
ANOTHER CRANE. RE-CHECK THE PROGRAMMING IN THE TRANSMITTER AND RETEST. AFTER
ACTIVATION OF RECEIVER, FUNCTIONALLY TEST ALL COMMANDS ON THE TRANSMITTER BY
INITIALLY JOGGING THE BUTTONS, THEN WITH A FULL MOVEMENT BEFORE RETUNING TO SERVICE.
FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY OR DEATH AND DAMAGE TO
EQUIPMENT.
To send a program file, consisting of up to four banks, to a telePendant Transmitter:
1.
Turn transmitter unit OFF. Note that the Tx Red LED is OFF.
2.
Switch the unit to Bank 5 by: pressing the ON button down; while holding the ON button down press the fifth
down from the top motion button down; next, release the ON button; and then release the fifth motion button.
Note that the Tx Red LED is flashing quickly five times then pausing. This flashing indicates you are in bank 5.
2 SPD telePendant
Name: ……………………………..…. M
Tx Type
Use bank password
Setting
Admin
First press Button 6
Second press Button 5
Third press Button 4
Fourth press Button 3
New
Open
Rename Current
Delete Current
Save Current
Save Current As
Bank 1
on
Bank 2
off
Bank 3
on
Bank 4
off
