Enrange CHTX Transmitter Instruction Manual
December 2017
Page 33 of 47
Receive Device Data Checkbox
At the bottom of the New Project window, there is a checkbox that allows the user to automatically
download the setting values on the device upon connection.
NOTE:
This checkbox is checked by default.
Having the “Receive Device Data” option checked will cause the program to automatically read the data
that is currently on the device upon the user clicking the Add button.
Fig. 18
This screen also allows the programmer to create a specific name for the device to help track device
settings and changes. It is recommended that a unique name is chosen for each device programmed with
RCP.
WARNING
If “receive device data” checkbox is unchecked, the RCP program will overwrite all setting values on
the device with default values and any settings changed by the operator upon sending the program to
the device. All stored value settings within the device will be replaced, including any project-specific
values. Magnetek strongly recommends that the “receive device data” checkbox be left checked.