![background image](http://html1.mh-extra.com/html/magnetek/chtx/chtx_instruction-manual_3584902034.webp)
Enrange CHTX Transmitter Instruction Manual
December 2017
Page 34 of 47
5.4.1
CHTX Configuration Screens
The CHTX transmitter has two configurable screens available to change settings on:
• The first screen allows the configuration of general transmitter settings (Transmitter
name, Access code, RF channel, etc.).
• The second screen allows the configuration of the CAN bus network settings for
models with the optional CAN connector equipped.
Unit Info Screens
The Unit Info screen allows the user to view the receiver's Project ID and serial number. The user can
modify the transmitter name, access code, and RF channel as well as activate the password. This screen
may also be used by the user to synchronize the internal clock on the transmitter with the connected PC or
to manually set the clock/date.
NOTE:
Changing any of these items will require a reboot of the CHTX after the new information
has been sent to the device.
Fig. 19
Transmitter Name
The transmitter name field allows the user to create a custom name for the transmitter. The name can be
up to 16 ASCII characters long.
Project ID
This field displays the Project ID for the unit. The Project ID is set by the factory and cannot be modified by
the user.