Enrange CHTX Transmitter Instruction Manual
December 2017
Page 24 of 47
3.8.4
Signal Strength Indicator
The Signal Strength Indicator shows the radio signal strength at the receiver.
The Signal Strength Indicator is only available in systems equipped for Two-Way
feedback. For such systems, signal strength is displayed at the bottom right hand
corner of the graphic user interface screen.
Signal strength is displayed in 5% increments.
NOTE:
On 433 MHz systems, the signal strength indicator will show minimum signal
strength regardless of the actual signal strength. Systems utilizing the 433 MHz
frequency band do not have two-way feedback.
3.8.5
Two-Way Feedback System
This option allows the user to view various parameters that may be important to the
operation of the equipment on the graphic user interface display screen.
Parameters such as engine RPM, torque or speed of a drive, temperature, current, or
any other useful values can be sent from the receiver and displayed on the transmitter.
NOTE:
Systems utilizing the 433 MHz frequency band do NOT have two-way feedback
available.
3.9 Joysticks and Paddles/Levers
To activate the desired motor functions, operate the joystick or paddle/lever that corresponds to the desired
motion.
To activate higher speed functions for those transmitter models so equipped, operate the joystick or
paddle/lever further to activate the desired speed.
3.10 Rotary Selector Switch
The rotary selector switch can be used to select various modes of operation.
A rotary switch can have 2 to 12 positions to select from.
3.11 Auxiliary Switches
These switches activate special function relays that control items such as grab attachments, magnets, and
lights.
The auxiliary switches can be momentary or latched.
