Enrange CHTX Transmitter Instruction Manual
December 2017
Page 15 of 47
To change the alkaline batteries in the battery pack, separate the inner tray from the
outer housing (see Fig. 4) and replace all the batteries with new ones.
Fig. 4: Separated Alkaline Battery Pack
When reinserting the tray into the outer housing, make sure the grooves in the inner tray
align with the slides in the outer housing. When placing the battery pack into the CHTX
battery pocket, orient the battery pack so that the sticker is facing down (see Fig. 5).
Fig. 5: Installation of Battery Pack into CHTX Transmitter
After installing the battery pack, install the battery cover over the battery and secure by
tightening the thumbscrews at each end of the battery cover (see Fig. 6).
Fig. 6: Installation of Battery Cover
NOTE:
For the battery level indicator on the CHTX units equipped with either the
standard status LED or the optional graphic user interface, the battery type dip switch
settings must be set for the battery pack being used in order to display the correct low
battery level indication.
See Section 3.2.3 on page 16
for details on setting the battery
type dip switches.