![background image](http://html1.mh-extra.com/html/magnetek/chtx/chtx_instruction-manual_3584902040.webp)
Enrange CHTX Transmitter Instruction Manual
December 2017
Page 40 of 47
6 Transmitter RF Channel Configuration
The RF channel can be set via the setup mode on systems equipped with the optional graphic user
interface, or it can be set up by using the dip switch block on systems not equipped with the optional
graphic user interface.
Section 6.2 on page 41
and
Section 6.3 on page 42
show the channels and
protocols available for each transmitter radio frequency option.
NOTE:
On transmitters equipped with the standard status LED, the channel can only be
changed using the dip switch block as detailed in
Section 4.1 on page 25
.
6.1 FCC Statements
Compliance Statement (Part 15.19)
This device complies with Part 15 of FCC
rules.
Operation is subject to the following two
conditions:
1.
This device may not cause harmful
interference, and
2.
This device must accept any
interference received, including
interference that may cause
undesired operation.
Warning (Part 15.21)
Changes or modifications not expressly
approved by the party responsible for
compliance should void the user’s
authority to operate the equipment.
This portable transmitter with its antenna
complies with FCC’s RF exposure limits
for general population/uncontrolled
exposure.