Enrange CHTX Transmitter Instruction Manual
December 2017
Page 26 of 47
Fig. 13: Dip Switch Block as Viewed on the Bottom of the CHTX CPU Board
NOTE:
The dip switch block switches are oriented so that the OFF position is next to
the number designator and the ON position is up or away from the number designator.
Regardless of which radio frequency the transmitter was equipped with, the RF channel
dip switch settings are the same.
See Section 6.2 on page 41
and
See Section 6.3 on
page 42
for details on the specific RF channel details for the radio frequency that the
transmitter is equipped with.
Fig. 14 details the dip switch positions for each RF channel.
Fig. 14: Dip Switch Positions for RF Channel Selection
