Enrange CHTX Transmitter Instruction Manual
December 2017
Page 36 of 47
Please familiarize yourself with this section before programming your password.
If you choose to enable the password function, you can create a new password by selecting a 4-digit
numerical password using numbers from 0 to 9. Be sure to write down this password in a safe place for
future reference.
The password default setting is to be disabled during initial programming by the RCP software. To enable
password protection, check the box next to the phrase “Activate password.”
Backlight Enable
This section allows the user to enable the LCD display backlight (on systems equipped with graphic user
interface LCD display) and select the period of time after transmitter activity that the backlight stays on.
The user has the option to check the “Always On” checkbox for backlight timeout. If this box is checked,
the backlight will remain on continuously while the transmitter is active.
NOTE:
The longer the backlight is turned on, the shorter the transmitter battery life will be.
The user can also enable the backlight to turn off or time out after a period of time. The user can select the
custom field and enter the time (in seconds) that the backlight should be lit. The range of allowable values
is 1 to 30 seconds.
WARNING
Always remember to store the password in a secure location for access if the password is lost or
forgotten. Once the transmitter is programmed with a password, there is no way to defeat the password
without using the RCP software to either read the password or reprogram a new password.
WARNING
This password function is not to be used as a security device. The purpose of this function is to prevent
accidental changes to the transmitter settings. The best form of security is always to lock up the
transmitter when not in service. Failure to follow this warning could result in serious injury or death and
damage to equipment.
WARNING
Not enabling the password function allows the transmitter settings to be modified by any unauthorized
users. Improper transmitter settings could result in serious injury or death and damage to equipment.