![background image](http://html1.mh-extra.com/html/magnetek/chtx/chtx_instruction-manual_3584902032.webp)
Enrange CHTX Transmitter Instruction Manual
December 2017
Page 32 of 47
Install the RCP Software
Install the RCP software onto the computer. The software is self-installing; simply insert the flash drive into
any available USB port and follow the on-screen prompts. Refer to the installation instruction sheet for
help. You will be prompted to enter an activation code. The code is printed on the flash drive’s outer case
and on the installation instructions. The software cannot be used without this code.
Run the RCP Software
After installation of the RCP software, double-click the RCP icon to launch the program.
Fig. 16
Click on New Project or Open Project
Select “New Project” if you are creating a new program file. Select “Open Project” if you want to retrieve an
existing program file. A list of recent projects will appear under “Open Project.” Clicking on one of these will
open that project. It is recommended that you create a folder in which to save all programming files.
Fig. 17
For New Projects, Select Device Type
After the New Projects icon is selected, a menu will open listing the available device types. Select the
device type that matches the product you wish to program. Upon selection of a project type, a picture of
the product will be displayed for verification.