MADRIX STELLA, User Manual

Page: 62 / 115

[Part 3] Using MADRIX 5 Software
//62
www.madrix.com
MADRIX STELLA User Manual
§
ACN Device Count - Set up how many you are going to use.
[This is the total amount of OUT and IN devices. Please set the exact number of devices you are using. If the
count is higher, this creates unnecessary network traffic.]
§
Click Apply
§
ACN CID - Being a network protocol, Streaming ACN sends a so-called CIDs [Component Identifier].
- Every single ACN device has such a unique ID.
- When using Streaming ACN, your MADRIX 5 Software is one of those devices.
- When you start MADRIX 5 for the first time, this ID will be generated automatically for you. From this point
onwards it will be used on your PC.
- With this ID your MADRIX 5 Software can be easily identified in the network. Interfaces can detect this unique
ID and can be configured to receive data from this particular device. Please note that the ACN interface must
support this feature.
- Do not change the ACN CID, unless you are an experienced user!
§
Click OK to close the window.