MADRIX STELLA, User Manual

Page: 104 / 115

[Part 5] General
//104
www.madrix.com
MADRIX STELLA User Manual
Set up the following settings:
§
Enable Use the following IP address:
§
IP address - Sets the IP address for this computer and this network card.
- If you have several network cars in your computer, you can set up an individual address for each network
card.
- An IP address has 4 parts. Enter the complete address as explained in the specific chapter of this user guide
[e.g., 10.0.0.1].
- You only have to enter the numbers.
§
Subnet mask - Sets up the Subnet mask for this computer.
- This is an important part of the network settings, just as the IP address.
- A Subnet mask has 4 parts. Enter the complete address as explained in the specific chapter of this user guide
[e.g., 255.0.0.0].
- You only have to enter the numbers.
§
OK - Click to save your settings.
- [Make also sure to close the Local Area Connection Settings with OK and close the Local Area
Connection Status window with Close .]
§
Restart the MADRIX 5 Software if you have changed any network settings!
Learn more below.