MADRIX STELLA, User Manual

Page: 6 / 115

[Part 1] Overview
//6
www.madrix.com
MADRIX STELLA User Manual
2] Connecting To Power And Data
See the MADRIX STELLA Technical Manual & Quick Start Guide on how to connect to power and data.
»
help.madrix.com
3] Device Settings
Make sure to set the correct network data source and other settings according to the
controller/sender you want to use.
Learn more:
§
» Configuration Using A Web Browser
LED Status Codes
The following tables describe the LED status codes of the device.
STATUS STATUS LED POWER
Powered off Power not connected. > The device has no power.
Permanently green Connected to power. > The power is on.
Blinking green Bootloader activated. > Reset device / upload firmware.
STATUS STATUS LED USB
Powered off USB not connected.
Red +
blinking green
Communicating over USB.
> Sending or receiving data over USB. The USB port works.
Fading between
red + green
Connected to USB; Drivers installed correctly.
> No data is sent over USB.