MADRIX STELLA, User Manual

Page: 58 / 115

[Part 3] Using MADRIX 5 Software
//58
www.madrix.com
MADRIX STELLA User Manual
Open - Loads a previously saved MADRIX 5 DMX
Remote Configuration file [of the file type *.mdrx].
Protocols - Choose from a pre-configured protocol
[configuration].
DMX-IN Remote Editor - Allows you to modify a
configuration or create a new configuration.
Start Address - Defines on which particular DMX
channel the protocol should start. The whole protocol
will be mapped to this new address area.
DMX Watcher - Opens the DMX Watcher to monitor
your DMX output or input.
Trigger
§
Use Trigger, if you want to use incoming signals for the MADRIX 5 TRI Effects.
§
First, select your device in the list.
§
Activate Trigger