MADRIX STELLA, User Manual

Page: 36 / 115

[Part 3] Using MADRIX 5 Software
//36
www.madrix.com
MADRIX STELLA User Manual
3] Fixture Patching In MADRIX 5
§
Start MADRIX 5.
§
Configure the virtual LED matrix using the Matrix Generator or Patch Editor.
4] Activating Streaming ACN
§
Go to the menu Preferences > Options... > Devices Network
[Keyboard shortcut: Ctrl+Alt+O > Devices Network ]
§
Activate ESTA - Streaming ACN
§
Choose your network card from the drop-down list. Make sure to select the correct network adapter that
will be used for Streaming ACN!
[The IP address and Subnet mask label should help you select the correct adapter. It is not necessary to change
any of these networks settings.]
§
ACN Device Count - Set up how many you are going to use. MADRIX STELLA requires 2 sACN devices per
unit.
[This is the total amount of devices. Please set the exact number of devices you are using. If the count is higher,
this creates unnecessary network traffic.]
§
Click Apply