MADRIX STELLA, User Manual

Page: 83 / 115

[Part 4] Technical Support
//83
www.madrix.com
MADRIX STELLA User Manual
MADRIX Version
MADRIX 5.0d
Release Date
August 2018
STELLA Firmware
2.02.7206
MADRIX Version
MADRIX 5.0e
Release Date
February 2019
§
Added RDM support.
§
Added support for 2 Ethernet ports [Model V1.2 required].
§
Added daisy-chain support [Model V1.2 required].
§
Web configuration page: Universes up to number 32,768 can now be assigned.
§
During normal operation, pressing the Reset button now sends an Art-Net PollReply
[e.g., Device Manager] and a MADRIX PollReply [MADRIX Device Configuration].
§
Changed the Art-Net PollReply to assign a separate BindIdx to each universe.
§
Fixed an issue that did only apply a new IP address after changing it over USB after
disconnecting it from power first.
STELLA Firmware
2.03.7236
MADRIX Version
MADRIX 5.1
Release Date
June 2019
§
Fixed an issue that only applied a new IP address that was set over USB after a
power cycle.
§
Fixed an issue that did continue to send the last frame that was received over USB
under certain circumstances although new network data was received.
§
Fixed an issue that did not allow receiving data over USB when merging data from
Art-Net and sACN.
§
Fixed an issue that allowed special characters and control characters [ASCII] in
names and descriptions, which are not filtered out.
STELLA Firmware
2.03.7252
MADRIX Version
MADRIX 5.1a
Release Date
August 2019
§
Fixed an issue that could make the device become unresponsive when using RDM
and both ports at the same time.
STELLA Firmware
2.03.7259
MADRIX Version
MADRIX 5.2
Release Date
November 2019
§
Channel Order 4-1-2-3 has been added.
§
Now clears the input buffer in order to discard obsolete and incorrect RDM packages
before sending out new requests to avoid that packages cannot be assigned and
processed correctly due to timeouts.
STELLA Firmware
2.3.7261
MADRIX Version
MADRIX 5.3
Release Date
May 2020
-