LXE MX3X, Reference Manual

Page: 99 / 150

Control Panel Options 89
E-EQ-MX3XRG-A MX3X Reference Guide
Change a Virtual Key (F20 or F21) Value
Modify the Registry using the Registry Editor (see section titled “MX3X Utilities”). LXE
recommends
caution when editing the Registry and also recommends making a backup copy of
the registry before changes are made.
Go to HKEY_LOCAL_MACHINE \ Software \ LXE \ Scanner.
Set either the ScanCodeLeft or ScanCodeRight to be the scan code of the key to be used as the
virtual key when the Virtual Left key (Left Scan key) or Virtual Right key (Right Scan key) is
pressed. The MX3X registry requires a decimal value.
COM Ports
Main COM1 COM2 COM3
Keys
19200
9600
4800
2400
1200
300
Baud Rate
Power on pin 9 (+5V)
Data Bits
Stop Bits
Scanner Control
Parity
Figure 4-14 Scanner Properties / COM Port Settings
Adjust the settings and click the OK box to save the changes. The changes take effect
immediately.
The COM 1 display contains the same parameters as the COM 2 and COM 3 Tab. Adjust the
settings and click the OK box to save the changes. The changes take effect immediately.