LXE MX3X, Reference Manual

Page: 97 / 150

Control Panel Options 87
E-EQ-MX3XRG-A MX3X Reference Guide
Scanner
Access: Start | Settings | Control Panel | Scanner
Set scanner keyboard wedge, scanner icon appearance, active scanner port, and scan key settings.
Assign baud rate, parity, stop bits and data bits for available COM ports.
Factory Default Settings
Main
Port 1
Internal
Port 2 Disabled
Power Port 1 while asleep Disabled
Send key messages WEDGE Enabled
Keys
Left Scan
Right Enter
COM Ports (COM1- COM2 – COM3)
Baud Rate
9600
Parity None
Stop Bits
1
Data Bits 8
Power on Pin 9 Off
Note: If the internal scanner has to be configured to operate at any communication settings
other than 9600, N, 8, 1 and the computer either loses power or a cold boot command is
entered, the Scanner applet must be reconfigured to match the scanner communication
settings.
Note: ActiveSync will not work over a COM port if that COM port is enabled in the Scanner
applet as a scanner input. For example, if COM 1 is being used by the scanner, COM 1
can’t be used by any other program.
Main
Send Key Messages (WEDGE)
Power Port 1 while asleep
Main COM1 COM2 COM3 Keys
Port 2
Port 1
Scanner Control
Figure 4-12 Scanner Properties / Main Tab
Adjust the settings and click the OK box to save the changes. The changes take effect
immediately.