LXE MX3X, Reference Manual

Page: 24 / 150

14 Getting Started
MX3X Reference Guide E-EQ-MX3XRG-A
Set Up the Cisco Radio
The Cisco Radio icon is either on the Desktop or under Start | Programs | Cisco.
Tap the icon with the stylus.
Please contact your IS department for WEP and LEAP encryption information.
Access: Start | Programs | Cisco | Aironet Client Utility (ACU) | Profiles
1. Select an Active Profile. Tap Edit.
2. Select SSID and enter your device’s SSID value.
Using WEP?
3. If the access point is using WEP, select WEP and click the Static WEP Key box.
4. Enter the WEP Encryption Code and click OK.
5. Tap OK.
Using LEAP?
3.
If the access point is using LEAP, select Network Security Type and select LEAP.
4. Enter the User Name and Password when prompted. Tap OK.
Note: If the access point uses authentication protocol (LEAP, etc.) your radio must use the
same authentication keys. Please contact your IS department for LEAP encryption keys
before contacting LXE. LEAP is an authentication protocol used to encrypt data sent and
received from the MX3X to the access point.