LXE MX3X Reference Manual Download Page 14

Page: 14 / 150

When to Use This Guide

MX3X Reference Guide

E-EQ-MX3XRG-A

Document Conventions

ALL CAPS

All caps are used to represent disk directories, file names, and application names.

Menu | Choice

Rather than use the phrase "choose the Save command from the File menu", this guide uses the
convention "choose File | Save".

"Quotes"

Indicates the title of a book, chapter or a section within a chapter (for example, "Document
Conventions").

< >

Indicates a key on the keypad (for example, <Enter> ).

Indicates a reference to other documentation.

ATTENTION

Keyword that indicates vital or pivotal information to follow.

Attention symbol that indicates vital or pivotal information to follow. Also, when marked on product,
means to refer to the manual or user’s guide.

International fuse replacement symbol. When marked on the product, the label includes fuse ratings
in volts (v) and amperes (a) for the product.

Note:

Keyword that indicates immediately relevant information.

CAUTION

Keyword that indicates a potentially hazardous situation which, if not avoided, may result in minor
or moderate injury.

WARNING

Keyword that indicates a potentially hazardous situation which, if not avoided, could result in death
or serious injury.

DANGER

Keyword that indicates a imminent hazardous situation which, if not avoided, will result in death or
serious injury.

Summary of Contents for MX3X






















































































































































Search results

Summary of Contents for MX3X

Reviews:

Brands by name

Popular brands

LXE MX3X, Reference Manual

Search results

Summary of Contents for MX3X

Reviews:

Brands by name

Popular brands