manualshive.com logo in svg

LXE MX3X, Reference Manual

Share
Download
LXE MX3X Reference Manual Download Page 69

Important Battery Charger Version Information 

59 

E-EQ-MX3XRG-A 

 

MX3X Reference Guide 

Important Battery Charger Version Information 

Battery Chargers Affected 

 

 

MX3 Multi-Charger Plus 

9000A377CHGR5 

Use LXE V1.01 Upgrade Kit 

MX3 Multi-Charger 

MX3A378CHGR6 

(Not Available After 7-2003) 

Use LXE V1.20 Upgrade Kit 

 

The MX3X Main Battery Pack may be incompatible with MX3 Battery Chargers that have not 
been upgraded to V1.20 or V1.01. To successfully charge the MX3X Battery Pack, pre-existing 
MX3 Battery Chargers must be returned to LXE for a software upgrade. 

Using a Multi-Charger Plus Battery Charger with the MX3X Battery Pack 

The MX3X device is designed to use a 2.2Ahr Main Battery Pack to achieve 8+ hours of 
continuous operation.  

If the MX3X battery pack is inserted into a MX3 Multi-Charger Plus (without the V1.01 upgrade) 
bay , the battery may not become fully charged in the 4 hour time limit and a red LED illuminates 
after 4 hours have elapsed indicating a Battery Problem.  

Remove and reinsert the MX3X battery pack into the same charging bay. This will reset the timer 
and allow the charger to complete the charge cycle for the battery in approximately 2 hours..  

 

 

LXE does not supply an external timing 
device with the Multi-Charger Plus. 

Battery Label Location 

The MX3X battery pack has a silver label (as opposed to the white labels on LXE’s MX3 and 
MX3-CE battery packs).  

 

125 Technology Parkway
Norcross, GA 30092 USA

Risk of fire, explosion, or burns. Do not short circuit, crush, heat above
100 C, incinerate or disassemble the battery.

!

 

 

Summary of Contents for MX3X























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands