LXE MX3X, Reference Manual

Page: 77 / 150

Start Menu Program Options 67
E-EQ-MX3XRG-A MX3X Reference Guide
Symbol
Note: When making changes to profile parameters, the MX3X should be warmbooted
afterwards.
Access: Tap the Network Connected Icon in the Status Bar
IP Information Tab
After the IP Address has been assigned to the MX3X, tap the Renew button to renew the IP
address if necessary.
Tap the Details button to view the Network Connection details.
IPv6 Information Tab
This is the TCP/IPv6 information screen. The contents cannot be edited by the user.
Wireless Information Tab
Factory Default Settings
Wireless Information tab
Notify when new networks available
Enabled
Advanced Button
Use Windows to configure wireless settings
Enabled
Automatically connect to non-preferred networks Disabled
Networks to access (Only APs, Only comp-to-comp) All available
Encryption (WEP, TKIP) WEP
Authentication (WPA, Open, Shared, WPA-PSK) WPA
Ad hoc network Disabled
Key provided automatically Enabled
Enable 802.1X authentication Enabled
EAP Type (MDF-Challenge, PEAP, TLS) TLS
View Log
Displays the logon/connection data for the current network connection.
Add a new connection
Select Add New . Enter the ESSID in the Network Name text box.
Disable WEP
•
If WEP is to be disabled, tap the down arrow in the Authentication drop down box. Select
Open .
•
Tap the down arrow in the Encryption drop down box. Tap Disabled and WEP is
disabled.
Enable WEP
•
Tap the down arrow in the Authentication drop down box.
•
Tap the WEP Authentication protocol.
•
If the key is provided automatically by your network, check the “ Key provided
automatically ” checkbox.