LXE MX3X Reference Manual Download Page 96

Page: 96 / 150

Control Panel Options

MX3X Reference Guide

E-EQ-MX3XRG-A

Battery Power Scheme

Use this option when the MX3X will be running on battery power only.

Switch state to User Idle:

Default is After 3 seconds

Switch state to System Idle:

Default is After 15 seconds

Switch state to Suspend:

Default is After 5 minutes

AC Power Scheme

Use this option when the MX3X will be running on external power (e.g. AC adapter, auto outlet
adapter, powered cradle).

Switch state to User Idle:

Default is After 2 minute

Switch state to System Idle:

Default is After 2 minutes

Switch state to Suspend:

Default is After 5 minutes

Device Status

This option displays the power levels being used by MX3X devices.

Regional Settings

Access:

Start | Settings | Control Panel | Regional Settings

Set the appearance of numbers, currency, time and date based on regional and language settings.

No change from general desktop PC Regional Settings Properties options. Adjust the settings and
click the OK box to save the changes. The changes take effect immediately.

Factory Default Settings

Regional Setting

English (United States)

Number

123,456,789.00 / -123,456,789.00 neg

Currency

$123,456,789.00 pos / ($123,456,789.00) neg

Time

h:mm:ss tt (tt=AM or PM)

Date

M/d/yy short / dddd,MMMM,dd,yyyy long

Remove Programs

Access:

Start | Settings | Control Panel | Remove Programs

No change from general desktop Remove Programs options. Select a program and click Remove.
Follow the prompts on the screen to uninstall

user-installed only

programs. The change takes

effect immediately.

Summary of Contents for MX3X






















































































































































Search results

Summary of Contents for MX3X

Reviews:

Brands by name

Popular brands

LXE MX3X, Reference Manual

Search results

Summary of Contents for MX3X

Reviews:

Brands by name

Popular brands