manualshive.com logo in svg

LXE MX3X, Reference Manual

Share
Download
LXE MX3X Reference Manual Download Page 17

Getting Started 

7 

E-EQ-MX3XRG-A 

 

MX3X Reference Guide 

Attach Handstrap (Optional) 

Once installed, the elastic handstrap provides a means for the user to secure the computer to their 
hand. It is adjustable to fit practically any size hand and does not interfere with battery charging 
when the MX3X is in a cradle. 

 

Figure 1-6  MX3X With Handstrap Installed 

Tool Required:  #1 Phillips Screwdriver 

Installation 

1.  Place the MX3X, with the screen facing down, on a flat stable surface. 

2.  Attach the handstrap to the MX3X with the screws and washers provided. 

3.  Test the strap's connection making sure the MX3X is securely connected to each end of the 

strap connectors.  

Attach the Stylus Clip (Optional) 

Carefully remove the paper backing from the Stylus Clip sticky. Firmly press the sticky side of the 
clip onto the MX3X and hold in place for 15 seconds. Thread the tether through the end of the 
stylus and tie the ends firmly to the Stylus Clip so that the ends don’t interfere with placing the 
stylus in the Stylus Clip or placing the MX3X in a cradle. Place the stylus in the Stylus Clip when 
not in use. 

Summary of Contents for MX3X























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands