manualshive.com logo in svg

LXE MX3X, Reference Manual

Share
Download
LXE MX3X Reference Manual Download Page 145

 

E-EQ-MX3XRG-A 

 

MX3X Reference Guide 

 

Index 

 

2nd key function ................................................. 44 

A

 

About 

software, hardware, version, network IP .......... 75 

Accessibility settings .......................................... 75 
Accessories 

Electrostatic Discharge ....................................... 5 
Installing ............................................................. 5 

ActiveSync.......................................................... 95 

Backup Data Files ............................................. 95 
Cold Boot and Loss of Host Re-connection...... 96 
Configure .......................................................... 19 
Connect ....................................................... 20, 95 
Create Comm Option ........................................ 98 
Explore.............................................................. 95 
IR port transmission.......................................... 69 
Prerequisites...................................................... 95 
Troubleshooting ................................................ 97 
Use this cable .................................................... 99 

ActiveSync Cable Connected to Serial port on 

Cradle ............................................................. 51 

ActiveSync Help................................................. 70 
ActiveSync Options............................................ 69 
ActiveSync Setup Wizard................................... 69 
ActiveSync version 3.7....................................... 69 
Allow Connection............................................... 83 
Alt key function .................................................. 45 
API calls ........................................................... 102 
Appearance 

Scheme.............................................................. 78 

approved stylus ................................................... 48 
At Power On ....................................................... 82 
Audio Jack, connect............................................ 10 
Audio Volume settings ....................................... 18 
Auto hide ............................................................ 73 

B

 

Background and Window colors ........................ 78 
Backlight Timer .................................................. 16 
Backlight timers.................................................. 78 
Backup Battery 

Maintenance...................................................... 56 
Replacement...................................................... 56 
Time Limit ........................................................ 55 

Backup Data Files............................................... 95 
Barcode Scanner 

Integrated .......................................................... 39 
Tethered ............................................................ 39 

Barrel connector, power jack................................ 9 
Battery 

Backup .............................................................. 56 
Charge New ........................................................ 5 
Charge or Discharge buttons for backup battery 

maintenance .................................................. 76 

Charger ............................................................. 57 
Charging ........................................................... 31 
Handling Safely ................................................ 54 
Lithium-Ion (Li-Ion)......................................... 31 
Nickel Cadmium (NiCad) ................................. 31 

Battery Auto Turn Off ........................................ 78 
Battery Compartment ........................................... 6 
Battery Life 

Approximate ..................................................... 54 

Battery pack label location ................................. 59 
Battery tab .......................................................... 85 
Battery voltage and status display ...................... 76 
Battery, charge before using................................. 5 
Baud Rate ........................................................... 87 

C

 

Calibration .......................................................... 91 
Caps mode function............................................ 45 
Certificates.......................................................... 76 
Character Recognition 

Touch screen..................................................... 72 

Charger 

Battery............................................................... 57 

Charging Battery 

Time Required .................................................. 31 

Cisco Client ........................................................ 66 
Cleaning.............................................................. 49 
Clear Contents of Document Folder................... 73 
Clear persistant memory................................... 103 
COLDBOOT.EXE............................................ 101 
Color displays............................................... 30, 48 
Color displays and backlight timers ................... 16 
Color screen 

Backlight........................................................... 78 

COM port settings tab ........................................ 89 
COM Port Switching .......................................... 31 
COM Ports.......................................................... 87 

Configurations .................................................. 31 

Command Prompt............................................... 71 
Communications................................................. 70 

Summary of Contents for MX3X























































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands